Photo Design

Order an individual photo design, as well as get acquainted with the collection of ready-made photo design on our website / shop. Photo design when used as a building or correction of artificial nails, manicures and when. The technology of its use involves several steps: 1. Before applying stickers photodesign nail should be prepared: If the nails need to apply a base coat of gel, dried in the tube and removing the adhesive layer, apply a white gel in the background as the place where it will be a sticker (if the picture will more precise) for the application do not need a white background - it is applied to the appropriate master background. Photo Design in case of damage during regular manicure is necessary to put a background white paint in a place where there will be a sticker, or, if application, the background color you want the wizard. 2. Cut the label form 'manicure' can be either in the form of a rectangle, or in the form of a nail, cut applique around the contour (when applied to the nail background will not be visible). Carved label must be at least 1-1.5 mm nail.

If necessary, make several incisions are made to better lay the sticker. 3. Then you must separate the label from the substrate by means of needles, scissors or a sharp edge own nails. Hooked edge labels, tweezers or a needle to place it on the nail. If necessary, you can dip into the gel sticker (in the case of capacity) or adhesive (for nail) - sticker will slide over the nail and its can be placed as needed. 4.

On top of the sticker is covered with a thin layer of gel (in the case of capacity) or a transparent varnish (for nail). On the manicure can apply a coat of fixative. Before applying the varnish can be adjust the edge of a picture paints or glitter. 5. In the case of capacity after fixing the gel in the tube is put another thin layer of gel and is decorated: the edges of the picture are masked with sequins or foil itself figure can also decorate with sequins, Bulyonkov, feathers, clay modeling, etc. 6. Further applied sculptural gel layer is obpil, if necessary is done drawing. The final stage - the application of the finish-gel. Master class from Feleheeta, Serpukhov: 1.modeliruem nail and process bafom. 2.veernoy brush plot the white background, without affecting the region. 3.prikleivaem fotodiz - with tweezers. 4.spilivaem sawing at the edges, you can cut down a little more. 5.delaem dorisovki can be painted or colored gel. 6.nanesla color gel, sprinkle glitter, dry in the tube. 7.perekryvaem single-phase or gel-sculptured, like seals, are not thin but not fat. the last layer of finish. You can, if no gel coat clear coat in two layers and fixed in the third - for drying paint (which prevents discoloration and flaking coating). View photos of each stage of the master class, please visit